VICTORIAN WALL MOUNTED BATH MIXER TAPS, RISER, RAIN HEAD & HAND SHOWER SET


VICTORIAN WALL MOUNTED BATH MIXER TAPS, RISER, RAIN HEAD & HAND SHOWER SET

Product no.: 011/019N/350

In stock

£149.95
Price includes VAT. Delivery charged extra.
Delivery weight: 7 kg


WALL MOUNTED VICTORIAN STYLE BATH SHOWER MIXER TAPS WITH A QUALITY EXPOSED DUAL FUNCTION RIGED RISER SET:

Traditional Victorian Style set of Bath Shower Mixer Taps with Low Pressure tap Gland mechanisms.
The taps are Wall-mounted (i.e. they are secured to the all or a vertical surface).
The body and fittings are solidly made from Brass with a polished 'mirror' Chrome finish.
The 'Cross' handles are marked with 'H' and 'C'.
It includes standard wall mounting connections ('S' Tails, Chrome cover plates & washers). 
The distance between inlet centres is a standard 150mm/15cms. The Tails allow a variation of approx +/- 20mm to this to assist with fitting. From the wall to the tip of the spout it measures approx 16 cms (with the chrome cover plates fitted), and a drop of approx 5.5 cms from the centre of the tap handles. 
The minimum water pressure required for the mixer is usually 0.25 bar (flow rate approx. 3.5 litres/min), so it is suitable for a regular gravity tank system (N.B. 2.5 metres minimum height drop is necessary ), however on account of the shower set we would recommend a system with at least 0.5 bars of pressure.
 
The Contemporary 'Exposed' Shower Riser pipework is in three main sections with an adjustable fixing bracket that is fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. The riser can be shortened by leaving out the short straight riser or sliding the upper section down into the longer straight section before securing it.
It comes with a matching Chrome 8"/20cms diameter Round 'Bell' Style Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top to enable you to angle it.
It comes with Chrome Handheld Shower Head with a white 'ridged' ABS plastic handle and a 1.5m Flexible Hose.
The Handheld Head has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail.
There is a Diverter Valve that is either positioned just above the Mixer or in between the two straight sections (as in the gallery picture), and which allows you to switch water between the 2 shower functions.
The entire Bath/Shower set Measures approx 1.52 metres tall from the centre of the inlets on the mixer (or 1.59m from the tip of the spout) to the top of the Overhead section, and the 'Arm' extends out approx 32 cms from the centre of the Riser Rail to the centre of the main Shower Head. The height can be shortened by leaving out the short riser section or sliding the upper section down inside the longer straight section before securing it.
Browse these categories as well: Thermostatic, Exposed Shower Sets, Bath / Shower Sets