This 'Torpedo' style Thermostatic Mixer Valve is Wall-mounted and the body is made of brass and finished in polished Chrome.
The Riser pipe connection on top is 3/4" BSP and measures 1" across in diameter (outside).
The minimum operating pressure is 0.25 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted).
The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C.
The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms.
It comes with standard wall-mounting connections ('S' Tail Connectors, Chrome cover plates & filter washers).
This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.