COMBO SET WITH TRADITIONAL VICTORIAN STYLE WALL-MOUNTED BATH SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS.

1. BATH/SHOWER MIXER TAPS.

These taps are wall-mounted, i.e. they fit against a vertical surface (wall or side of a bath). The main body and fittings are solidly made from Brass with a polished Chrome finish. It operates with Tap gland type mechanisms. The Cross handles are marked with 'H' and 'C'. 

A Brass/Chrome Handheld Shower Head with a white ABS handle is supplied. This sits on a Cradle, and a 1.5m Flexible Hose (also supplied). The box includes wall-mounting connections with cranked/threaded 'S Tail' Connectors (3/4":1/2" BSP size) and Chrome Cover plates. It does not include a wall-mounted fixing plate kit. 

The distance between inlet centres is a standard 150mm/15cms. The Tails allow a variation of approx +/- 2 cms to this to assist with fitting. From the wall to the tip of the spout it measures approx 16 cms (with the chrome cover plates fitted), and a drop of approx 5.5 cms from the centre of the tap handles. The overall height is some 23 cms. These Taps can also usually be used with the vertical surface of a free standing bath. Secure pipework may be necessary for fitting unless some kind of fixing plate or similar is used. The type of wall and pipework would determine if a fixing plate or similar is required. 

The taps can be used to replace deck-mounted taps by using the existing 'legs' so long as the centres of the tops of the legs are 150mm apart and they are 3/4" BSP size (threads measuring 1" diameter). 

The minimum water pressure required is 0.5 bars so it is suitable for a gravity tank system with 5 metres minimum height drop necessary. 

2. BASIN TAPS

A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated with Low pressure washered tap gland type mechanisms. 

The overall height of each tap is some 6.5cms and from the body to the tip of the spout it is approx 9.5cms. The threaded tails are 1/2" BSP and measure approx 40mm long. The base of the body is approx 34mm across. Each tap has a securing nut and washer.

The required/recommeded operating water pressure is 0.25 to 5 bars.