COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS.
1. Wall-mounted Bath/Shower Mixer Taps:
This Tap uses Single Lever Ceramic Disc Technology.
The body is solidly made from Brass with a polished Chrome Finish.
The spout has a diffuser mesh at the end for smoother water flow.
There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout.
It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms.
A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended.
NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section.
We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section.
2. Modern Monobloc Basin Mixer Taps:
This Tap uses Ceramic Disc Technology. It has a single lever operation.
The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings.
The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms.
A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended.
NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section.