1. Deck-mounted Bath/Shower Mixer Taps:

This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish.

The spout has a diffuser mesh at the end for smoother water flow.

There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout.

It includes a pair of Deck-mounting legs ('pillars') and 2 washers. The distance between the inlet centres where the legs fit onto the bath is the UK standard 18cms (180mm). From the tip of the spout to rear of the legs is some 19 cms.

A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended.

NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section.

2. Modern Monobloc Basin Mixer Taps:

This Tap uses Ceramic Disc Technology. It has a single lever operation.

The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings.

The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms.

A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended.

NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section.