COMBO SET: 1 WAY (1 OUTLET = 1 FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RECTANGULAR SHOWER HEAD AND CEILING ARM.
This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework.
The body and control knobs are solidly made of brass with a chrome finish.
There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow of water.
Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside).
The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C.
The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own.
As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation.
The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems.
The Rectangular Shower Head measures 233mm X 142mm (approx 9" X 5.5"). It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles!
The matching round style Chrome Shower Arm is Ceilingwall-mounted and measures some 10cms long (4"). The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer.