PAIR OF WALL MOUNTING EXTENSION LEGS:

• Pair of Wide or Narrow fitting Bath Shower Mixer Extension Tap Legs or Connections.
• The bodies are solidly made from Brass with beautiful polished Chrome Finish. 
• When fitted to a Bath Mixer Tap with inlets nuts on the back that are spaced at 150mm centre to centre, these legs can be positioned so that the other ends fit into vertical surface holes anywhere from 80mm to 230mm centre to centre.
• The length of each leg is some 8cms including the the cover plate/plinth.
• The threaded 'Tail' sections of each leg measures some 40mm long.
• The threaded tap connection section at the top of the leg measures approx 10mm.
• Each Extension leg comes with a chrome cover plate/plinth (approx 45mm diameter), securing nut/washer and rubber washer. A pair of 3/4"BSP Filter Washers are also supplied.
• The threaded connections are all 3/4" BSP (measuring 1" diameter across - outside). 

Flexible Stainless Steel Metal Shower Hose is some 1.5m in length.

This hose has 1/2" BSP female ends (measuring 3/4" across on diameter inside). The conical shaped one is for the hanheld shower head. The other 'nut' shaped one fits onto the mixer taps, shower valve, diverter, wall outlet, etc. They fit Standard UK 1/2" BSP sized connections on shower heads, wall outlets, taps, diverter connections, etc.

ALL METAL 'CONCEALED STYLE' SHOWER HOSE WALL OUTLET:

Round style Shower Hose Wall Outlet Connection. 

It is solidly made from brass and chrome. It measures some 5.5cms long (excluding concealed part), by 3cms wide. The main body section is some 27.5mm diameter. The Chrome cover plate is some 40mm diameter. 

The 'exposed' hose connection is a standard 1/2"BSP (measures 3/4" diameter).

The threaded tail is also 1/2" BSP and is some 28mm long. 

It comes with a securing nut and washer.

This fitting enables concealed pipework to connect through a shower wall to a Flexible shower hose.

It is made of brass with a polished chrome finish. The exposed 'cube' part measures some 2.7 X 2.7 X 2.7 cms. It has a securing nut & chrome cover plate with it.

Solidly made of Brass with a highly polished Chrome Finish, these Round Style 'Concealed' Body Jets have 3 individually adjustable outlets.

Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation.

The inlet connection at the back is 1/2" BSP 'male'.

Wall-mounted Shower Head/Hose Adjustable Bracket.

The body measures some 7 x 4.5 cms where it joins the wall. It protrudes approx 6.5 cms

The holder pivots vertically and it is frinished in Chrome. It can be tightened or loosened by a screw.

It is made from 'Plastichrome' (ABS plastic with a mirror chrome finish).

It comes with fixings (screws & plugs).

CHROME BACKPLATE ELBOW FOR SHOWER ARM Specification & Features:

This is a Back Plate Elbow for a 'fixed' wall-mounted Shower Arm. It is solidly made from brass with a chrome finish.

It can either be installed inside a wall cavity and be used with a 'concealed' style shower valve & wall-mounted arm, or it can be fixed directly to a shower wall and connected to an 'exposed' shower.

The Arm connection is 'female' 1/2" BSP and there is an 'Olive' joint on the other end (1/2" BSP/15mm). It can be used with either a Rigid Riser Rail, Copper Pipework, or a Flexi hose.

The 'Plate' has been rounded and then 'squared off' across the lower part. It has 3 fixing holes and measures some 5 cms across in diameter, by 3.8cms high. Fittings are not supplied.

Flexible Metal Shower Hose 1.7m in length and in Chrome finish.

This hose has 1/2" BSP female ends (measuring 3/4" across on diameter inside). The conical shaped one is for the hanheld shower head. The other 'nut' shaped one fits onto the mixer taps, shower valve, diverter, wall outlet, etc. They fit Standard UK 1/2" BSP sized connections on shower heads, wall outlets, taps, diverter connections, etc.

DIVERTER VALVE FOR TORPEDO STYLE SHOWER BAR VALVE OR SIMILAR.

Specification & Features:

This is an 'All Metal' Diverter Valve with a polished chrome finish. It is suitable to sit on top of a Torpedo style shower valve, or similar, thereby providing 2 outlet functions.

The 'female' base/lower connection nut fits onto a 3/4" BSP outlet (measures 1" across in diameter). The side connection is 1/2" BSP 'male' for a shower hose. It is controlled by pulling the side knob. The upper connection is 3/4" BSP 'male' and would attach to a fixed riser rail (not supplied).

The valve measures some 60mm high in total (including the threaded part on top and nut on the base). The body of the valve is some 40mm (excluding these parts).

At least 0.5 bars of water pressure is recommended.

CHROME PIPE/PLUMBING CONNECTOR:

This connector is Solidly made from brass with a silver chrome finish.

It has 1/2" BSP male threaded ends (actually measure 3/4" across in diameter - outside). Each threaded end is some 13mm long. The central 'nut' section is 5mm long and some 30mm at its widest part (corner to corner). The total length is 31mm.

This is suitable for connecting shower hoses or other 1/2" BSP female connections.