CERAMIC DISC CARTRIDGE:

New Water Control 'On/Off' Cartridge for some of our more recent 3 Function ( 3 'Way') 075N Shower Panels and the 3 Way 079N Concealed Shower Valve.

The Diameter of the Cartridge body is some 35.2mm. The overall length is some 83mm (excludes the lugs on the base) and the brass spindle/shaft including splines is 45mm.

There are 4 holes on the base with rubber seals which need to be tightly secured in the tap cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 27mm.

The diameter of the splines is 7.6mm and there are 20 'teeth'. Other dimensions are as per the pictures.

The Minimum recommended water pressure required is 0.5 bars, although operating between 1 to 5 bars is recommended.

If your shower is leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole shower panel/valve! 

PLEASE NOTE: Whilst this cartridge will fit most of the more recent batches of Showers/Valves that we have supplied, on occasions the manufacturer's have installed other slightly different cartridges. Please ensure you check your one before ordering and compare the measurements to be certain it will fit.

CERAMIC DISC CARTRIDGE:

New Water Control 'On/Off' Cartridge for some of our Dual Function (2 'Way') 046N and 063N Concealed Thermostatic Shower Valves.

The Diameter of the Cartridge body is some 32.8mm and the length of the main section is 29mm. The overall length is some 82mm (excludes the lugs on the base), The brass spindle/shaft including splines is 45mm.

There are 3 holes in the base with rubber seals which need to be carefully secured in the mixer valve body chamber cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 21mm.

The Minimum recommended water pressure required is 0.5 bars, although operating between 1 to 5 bars is recommended.

If your shower is leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole shower panel/valve! 

PLEASE NOTE: Whilst this cartridge will fit most of the more recent batches of Showers/Valves that we have supplied, on occasions the manufacturer's have installed other slightly different cartridges. Please ensure you check your one before ordering and compare the measurements to be certain it will fit.

CERAMIC DISC CARTRIDGE:

New Water Control 'On/Off' Cartridge for some of our Older versions of Dual Function (2 'Way') 046 and 063 Concealed Thermostatic Shower Valves. Many of these would have had blue cartridges originally and the new ones are now green colour.

The Diameter of the Cartridge body is some 32mm and the length of the main section is 28.9mm. The overall length is some 73.8mm (excludes the lugs on the base), The entire brass spindle/shaft including splines is some 36.5mm long.

There are 3 holes in the base with rubber seals which need to be carefully secured in the mixer valve body chamber cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 21mm.

The Minimum recommended water pressure required is 0.5 bars, although operating between 1 to 5 bars is recommended.

If your shower is leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole shower panel/valve! 

PLEASE NOTE: Whilst this cartridge will fit most of the more recent batches of Showers/Valves that we have supplied, on occasions the manufacturer's have installed other slightly different cartridges. Please ensure you check your one before ordering and compare the measurements to be certain it will fit.

CERAMIC DISC CARTRIDGE:

Water Flow Control Cartridge for the 158 Thermostatic Shower Valve.

The Diameter of the Cartridge body is some 32.5mm. The overall length is some 107mm without the lugs. The brass shaft/spindle including splines is 70mm.

There are 3 holes on the base with a shaped rubber seal which needs to be carefully secured in the tap body cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 20mm.

The Minimum recommended water pressure required is 0.5 bars, although operating between 1 to 5 bars is recommended.

If your shower is leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole shower valve! 

We recommend you check your existing cartridge's dimensions against those stated in this listing before ordering one in order to be certain it will fit.

REPLACEMENT/REPAIR THERMOSTATIC CARTRIDGE FOR BATH MIXER & VARIOUS STEAM CABINET TYPE SHOWER VALVES WITH SCREW-THREAD (NOT PUSH-FIT!):

Symptoms: Does your Bath Tap or Shower Valve no longer regulate the temperature effectively, or has the flow diminished? Are you getting strange 'surging' or vibration noises? Are you is a hard water area like some 60-65% of the UK? Solution: Simply change the cartridge, not the whole tap or shower! 

Specification & Features:

• Principally made from brass, this generic 'Screw-in' type Thermostatic Cartridge is suitable for many makes/types of Taps and Showers. Please note it is NOT a 'Push fit' type where you use a grub screw to secure it in the casting/body.
• The operating Temperature range is between 20 to 48 Degrees C, with safety override button at the 38 Degrees C position. The cartridge comes calibrated to 38 Degrees C. 
• The required/recommended water pressures for operation are 0.5 bars to 5 bars. The maximum imbalance ratio between hot and cold must be no more than 5:1. It can be used with most systems subject to these requisite water pressures.
• To install it with a Bath or Shower Mixer Tap/Valve, all you have to do is remove the handle (there is usually a small cap that can be prised off to reveal a grub screw inside), then use mole grips or similar to grab the large 'cogged' shaped section and unscrew from the casting/body. Insert the new cartridge & tighten, then attach the handle to the new cartridge and test it. With the new cartridge the manufacturer put markings on it to show where it has been calibrated to the 38 degrees position so you can line it up correctly with your handle/stop ring. Lubrication may well be needed around the black rubber seals. Always ensure your water is off when fitting!!
• The dimensions are:
• Total Length of Cartridge = Approx 90.6mm - including the copper end section.
• Widest section where the threads are = 34mm diameter.
• Depth of cartridge from top of threads to the tip of the splidle = 30mm.
• The 3 rubber washers are positioned at some 20mm apart.
• The fine screw threads are 7.7mm deep and there are approx 7 threads.
• There are 24 teeth/splines with a diameter os some 9mm.
• Please check the image above and the dimensions shown before purchasing and carefully compare to your one before purchasing/installing. 

CERAMIC DISC CARTRIDGE:

New Water Control 'On/Off' Cartridge for some of the versions of our Dual Function (2 'Way') 046 and Triple function (3 'Way') Concealed Thermostatic Shower Valves. NB: It is suitable for a 3 way only if you have a separate on/off control.

The Diameter of the Cartridge body is some 32.7mm and the length of the main section is 29.6mm. The overall length is some 83mm (excludes the lugs on the base), The brass spindle/shaft including splines is 45.5mm.

There are 3 holes in the base with rubber seals which need to be carefully secured in the mixer valve body chamber cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 20.5mm.

The Minimum recommended water pressure required is 0.5 bars, although operating between 1 to 5 bars is recommended.

If your shower is leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole shower mixer valve! 

PLEASE NOTE: Whilst this cartridge will fit most of the more recent batches of Showers/Valves that we have supplied, on occasions the manufacturer's have installed other slightly different cartridges. Please ensure you check your one before ordering and compare the measurements to be certain it will fit.

REPLACEMENT ON/OFF/FLOW CONTROL HANDLE FOR 057U/057UD BATH MIXER:

The Control handle comes with a grub screw & end cap, and fits the 057U/057UD Bath Shower Mixer.

Specification & Features:

Made from Zinc with 'mirror' chrome finish.

It fits onto 20 Splines/Teeth that are 7.5mm diameter.

To install it with a Bath Mixer Tap or one of the Shower valves, to remove the old handle all you have to do is prise off the end cap and undo the grub screw inside the handle.

REPLACEMENT THERMOSTATIC CONTROL HANDLE FOR 057U/057UD BATH SHOWER MIXER:

The Control handle comes with a 'stop ring', grub screw & end cap, and fits the 057U/057UD Bath Shower Mixer Taps.

Specification & Features:

Made from Zinc with 'mirror' chrome finish. The end cap is ABS.

It fits on to a thermostatic cartridge with 24 splines/teeth that are some 9.6mm diameter.

The stop ring is used to stop the handle turning beyond the 38 degrees point unless the spring loaded red button is depressed.

To install it with a Bath Mixer Tap or one of the Shower valves, to remove the old handle all you have to do is prise off the end cap section and undo the grub screw that holds the handle in place.

CERAMIC DISC CARTRIDGE:

New Water Control 'On/Off' Cartridge for some of our Dual Function (2 'Way') 046 and 046N oncealed Thermostatic Shower Valves.

The Diameter of the Cartridge body is some 32.7mm and the length of the main section is 29.5mm. The overall length is some 85.7mm (excludes the lugs on the base), The brass spindle/shaft including splines is 48mm.

There are 3 holes in the base with rubber seals which need to be carefully secured in the mixer valve body chamber cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 21mm.

The Minimum recommended water pressure required is 0.5 bars, although operating between 1 to 5 bars is recommended.

If your shower is leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole shower panel/valve! 

PLEASE NOTE: Whilst this cartridge will fit most of the more recent batches of Showers/Valves that we have supplied, on occasions the manufacturer's have installed other slightly different cartridges. Please ensure you check your one before ordering and compare the measurements to be certain it will fit.

REPLACEMENT/REPAIR LOW PRESSURE TAP GLAND CARTRIDGE:

Principally made from brass, this Ceramic Disc Cartridge is suitable for some of the 019/049D Victorian style Mixer Taps with 'X' handles that have previously been sold by us. This includes those mixers supplied with the Riser sets  011/019N/350 and 011/049N/350.

To access it you need to remove the handle by removing the 'H' or 'C' from the X handle, unscrew the chrome sleeve, then undo the cartridge with the nut shaped section. Always ensure your water is off when fitting!!

The Dimensions are:  Total Length of Cartridge when tightened (NB: Open) = 46mm. It is a standard 1/2"BSP size thread which measures 3/4" (approx 19.1mm) diameter where it fits into the Mixer body. The diameter of the section that hold a chrome sleeve is 23.6mm. There are 20 splines (teeth) and the diameter is 7.4mm.

Minimum operating pressure is 0.2 bars with more recommended ideally for a better flow. 

Please check the images above and the dimensions before purchasing to ensure a good match and carefully compare to your one before installing.