Flexible Stainless Steel Metal Shower Hose is some 1.5m in length.

This hose has 1/2" BSP female ends (measuring 3/4" across on diameter inside). The conical shaped one is for the hanheld shower head. The other 'nut' shaped one fits onto the mixer taps, shower valve, diverter, wall outlet, etc. They fit Standard UK 1/2" BSP sized connections on shower heads, wall outlets, taps, diverter connections, etc.

Flexible Metal Shower Hose 1.7m in length and in Chrome finish.

This hose has 1/2" BSP female ends (measuring 3/4" across on diameter inside). The conical shaped one is for the hanheld shower head. The other 'nut' shaped one fits onto the mixer taps, shower valve, diverter, wall outlet, etc. They fit Standard UK 1/2" BSP sized connections on shower heads, wall outlets, taps, diverter connections, etc.

TELEPHONE STYLE CRADLE FOR TRADITIONAL 'VICTORIAN' STYLE BATH SHOWER MIXER TAPS:

• The Cradle is solidly made from Brass with a polished Chrome finish.
• It is suitable for Traditional Victorian style bath shower mixer taps such as the ones shown in the gallery pictures. 
• The connection on the base is a 3/4"BSP female one (i.e. measures 1" diameter inside the connection section 'nut'). A rubber washer/seal is supplied with the cradle. 
• The side connection for the shower hose is a standard 1/2"BSP male one (i.e. measures 3/4" diameter).
• The gap between the two 'horseshoe' shaped seats for the handheld shower head to sit on is some 10cms/100mm. The cradle is 14cms tall.
• This listing is just for the Cradle itself. No mixer, handheld head or hose is supplied.  

CERAMIC DISC CARTRIDGE 35MM:

New Water Control 'On/Off' Cartridge for either Kitchen or Bathroom Taps, or Manual Mixer Shower Valves.

35mm is the Diameter of the Cartridge. The overall height (excluding the lugs) is some 57.5mm. The main body is 38.4mm high. The off-white coloured top section is some 18 x 9 x 9mm.

There are 3 holes on the base with rubber seals which need to be tightly secured in the tap cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 18mm.

The Minimum recommended water pressure is 0.45 bars.

If your taps are leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole tap!

NB: Colour may vary from the pictures

CERAMIC DISC CARTRIDGE 40MM:

New Water Control 'On/Off' Cartridge for either Kitchen or Bathroom Taps, or Manual Mixer Shower Valves.

The 40mm is the Diameter of the Cartridge body. The overall height (excluding the lugs) is some 65mm. The main body is 41.1mm. The off-white coloured top section is some 23 x 10.3 x 9.8mm.

There are 3 holes on the base with individual seals covering them and which need to be tightly secured in the tap cavity. It has 2 securing 'lugs' on the base and the distance between the centres of these is 24mm.

The Minimum recommended water pressure is 0.5 bars.

If your taps are leaking or won't shut off, then you may just need one of these Replacement Cartridges, instead of having to replace the whole tap!

REPLACEMENT/REPAIR CERAMIC DISC WATER FLOW CERAMIC DISC CARTRIDGE:

Symptoms: Does your Bath Tap or Shower Valve drip? Are you is a hard water area like 60-65% of the UK? Solution: Simply change the Ceramic Disc Cartridge, not the whole tap or shower! 
 

Principally made from brass, this Ceramic Disc Cartridge is suitable for various Mixer taps and shower valves.  This is the left side mechanism component part as you look at the front of the Mixer Taps/Shower.

To install it with a Bath Mixer Tap or Torpedo style Bar Shower valves, all you have to do is prise off the end cap, remove the grub screw inside, then undo the 'nut' shaped section of the cartridge. Always ensure your water is off when fitting!!

The Dimensions are:  Total Length of Cartridge = 48mm. It is a standard 1/2"BSP size thread (measures 3/4" diameter where it fits into the taps/valve body). This 'inside' section that goes into the Taps/Shower is approx 22mm long. The diameter of the main housing that fits inside the mixer body is some 17.8mm and it is approx 13mm long (excluding the threads). There are 20 splines (teeth) and the diameter of them is 7.5mm.

Please check the image above and the dimensions before purchasing to ensure a good match and carefully compare to your one before installing. Please note this is NOT a Thermostatic valve.

STAINLESS STEEL FLEXI HOSE FOR KITCHEN BASIN SINK PULL OUT MIXER LEVER TAP:

The hose is some 1.5 metres long and this can usually extend out from the taps by some 80-100cms (depends on where you locate the weight). It is made of Stainless Steel externally with a chrome finish. The threaded male end (which connects to the tap) is some 15mm diameter outside (please check as this size can vary with other hoses!). The female end (which connects to the Spray Handheld Spout end is a UK standard 1/2"BSP (measuring 3/4" diameter inside). It comes with 2 rubber washers (different sizes for each end)

A couple of examples of kitxhen mixers that this hose fits are shown in the picture gallery.

PAIR OF WALL MOUNTING EXTENSION LEGS:

• Pair of Wide or Narrow fitting Bath Shower Mixer Extension Tap Legs or Connections.
• The bodies are solidly made from Brass with beautiful polished Chrome Finish. 
• When fitted to a Bath Mixer Tap with inlets nuts on the back that are spaced at 150mm centre to centre, these legs can be positioned so that the other ends fit into vertical surface holes anywhere from 80mm to 230mm centre to centre.
• The length of each leg is some 8cms including the the cover plate/plinth.
• The threaded 'Tail' sections of each leg measures some 40mm long.
• The threaded tap connection section at the top of the leg measures approx 10mm.
• Each Extension leg comes with a chrome cover plate/plinth (approx 45mm diameter), securing nut/washer and rubber washer. A pair of 3/4"BSP Filter Washers are also supplied.
• The threaded connections are all 3/4" BSP (measuring 1" diameter across - outside). 

Pair of Flexible Stainless Steel Metal Tap Hoses, 1/2"BSP Nut & M10 male threads - Approx 40cms.

These hoses have one 1/2" BSP female end (measuring 3/4" across on diameter inside) and one M10 (10mm diameter) male threaded end on the other. The M10 ends screw into the base of a basin mixer tap and the female 'nuts' connect to your hot and cold feeds.

Pair of Flexible Stainless Steel Metal Tap Hoses, 1/2"BSP Nut & M10 male threads - Approx 50cms.

These hoses have one 1/2" BSP female end (measuring 3/4" across on diameter inside) and one M10 (10mm diameter) male threaded end on the other. The M10 ends screw into the base of a basin mixer tap and the female 'nuts' connect to your hot and cold feeds.