Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome.
The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm.
The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres.
The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard).
The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob.
This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.
It comes with a matching 'Multi-Spray' Handheld Shower Head ('plastichrome'), a 1.7m Flexi hose and an adjustable shower rail with sliding holder for the shower head.
The Adjustable Shower Rail measures approx 58cms in length and the body is made of brass with a chrome finish. The ends, sliding holder and soap dish are plastichrome. It comes with fittings.