1. Bath Shower Mixer Taps - Specification & Features:

• The Thermostatic Bath/Shower Mixer Tap are Wall-mounted.
• They have a connection for the shower set on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside), however an adaptor to convert the outlet to 3/4" BSP (measuring 1" diameter) is supplied in order to connect to the shower set.
• The spout has a mesh filter/aerator for smoother water flow.
• The body is solidly made of brass with a polished 'Mirror' Silver Chrome finish. The Control Handles are 'plastichrome'.
• The recommended operating water pressures for hot and cold are between 1 and 5 bar, although they should work at 0.5 bar.  NB: Please note that to achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of some 5 metres from the tank to the taps (i.e. equates to 0.1 bars per metre).
• The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body.
• The distance from the wall to the centre of the riser section is approx 7cms. 
• The taps come with standard Wall mounting connections including Chrome cover plates, 'S' Tail connections, and filter washers. The offset 'S' tails attached to the inlet nuts at the back of the mixer body. These nuts have a 150mm centre to centre measurement. The tails are 3/4BSP on one end and 1/2"BSP on the other.
• The left control knob (as you look at the front of the taps) controls the water on/off. The hot inlet is also on this side.
• The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob.
• This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

2. Riser Shower Set:

• The Contemporary 'Exposed' Shower Riser pipework is in three main sections with an adjustable fixing bracket that is fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish.
• It comes with a matching Chrome approx 7.5"/19cms diameter Round Rain Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top. The Nozzles are easy-clean rubber.
• In addition there is a flexible 1.5 metre shower hose with separate multi function spray 'plastichrome' Handheld Head which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail.
• There is a Diverter Valve that is either positioned just above the Mixer or in between the two straight sections, and which allows you to switch water between the 2 shower functions.
• The entire Bath/Shower set Measures approx 1.6 metres tall from the base of the mixer to the top of the Overhead section, and the 'Arm' extends out some 32 cms from the centre of the Riser Rail to the centre of the main Shower Head. The height can be shortened by either not using the shorter rtraight riser or sliding the curved riser down inside the longer straight one.