Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome.
The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres.
It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers.
The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard).
The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob.
This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.
They come with a 1.7m Chrome Flexible Hose and a 'Plastichrome' Multi spray Handheld Shower Head (approx 23cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings.