This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework.
The body and control knobs are solidly made of brass with a chrome finish.
There is 1 outlet which is controlled by the upper knob. This knob also controls the flow on water using a ceramic disc.
Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside).
The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C.
The exposed 'mirror' chrome Front Plates (behind the control knobs) are approx 70/75mms diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside.
As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation.
The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems.