WALL-MOUNTING PLATE KIT IN A CHROME FINISH.
Specification & Features:
This is a Wall mounting kit for a set of Bath taps or 'Exposed' Shower Valve with 150mm centres.
It is solidly made from brass with a polished 'mirror' chrome finish. The Plate is some 210mm wide and 50mm high.
It comes with 2 straight threaded Tails measuring some 60mm long. On one end is a 3/4" BSP threaded section (10mm) used to attach to the nuts on the back of the taps/valve. The other end has 1/2" BSP threads and which needs to be connected to the concealed pipework. There are securing nuts and rubber washers, along with fixings (screws & raw plugs). The securing nuts can also be used to secure the plate if access behind the wall is available, however these are not always required.